More often than not, drones are associated with fun activities and a means to help you spend your leisure time well. Not many of you would have known that drones are also used for a number of commercial purposes. For example, there is an application for a roof inspection drone.
There are a wide variety of drones available on the market that can be used for examining roofs. You must be familiar with the fact that roofs can get wet and even succumb to high-speed winds that might turn up owing to inclement weather conditions. Moreover, certain parts of roofs may get displaced; thereby allowing water to seep into your home.
Now, it’s time to have a look at the top 7 features of a good roof inspection drone. You can spend some money and buy such a drone to help you take care of your roof and inspect it from time to time.
Stability is one of the most crucial features of a decent roof inspection drone. As a matter of fact, in addition to flight stability, image stability is also of vital significance since it directly impacts the effectiveness and efficiency of the roof inspection process. Another feature that is of great importance and supports flight stability is the altitude hold feature. It enhances the flight stability of the drone and renders the maneuvering of the drone a lot easier for the pilot without having to trigger the autonomous flight feature on.
First Person View of a Roof Inspection Drone
If you are reading this term for the first time then First Person View (FPV) is a feature that lets you view what is being viewed by the drone’s camera in real-time. So, if a drone does not have FPV capability, there is no use for it for roof inspection purposes. It is quite evident why this kind of feature can be so handy as it lets you view what is being seen by the drone itself and gives you the impression as if you were sitting inside the aircraft’s cockpit. This is a must-have feature for all decent roof inspection drone.
[irp posts=”11708″ name=”How to Get Better Video Reception During FPV flights”]
How does a Roof Inspection Drone utilize GPS?
Most of you would be acquainted with the importance of GPS systems in modern-day drones. GPS and the Russian equivalent of GLONASS are integrated into most drones these days. These features tend to make the maneuvering of the device easier and also sets up things for more advanced features. The Waypoints feature is based on GPS. The pilot pre-programs the path of the drone using multiple waypoints on the maps and the drone follows the pre-destined trajectory autonomously. In addition to Waypoints, other features that make use of GPS include Orbit Me, Follow me, cable cam and many others. These features could be of great use for roof inspection as they let you concentrate on the roof inspection part without having to worry about flying the drone. The autonomous flight features would fly the drone and all you have to do is to view the live video feed on your monitor.
It goes without saying that a good quality camera is an essential ingredient of a decent roof inspection drone. You should prefer a camera that is compatible with a gimbal. This ensures greater image stability and lets the pilot capture different angles by pivoting the camera in different directions. I would recommend you to opt for a 20MP CMOS sensor camera that can capture video footage at 4K Ultra High Definition. This is pretty much the standard specification that you will be needing in terms of the camera.
[irp posts=”10519″ name=”Top 4K Camera Drones to Help You Capture Sensational Aerial Videos”]
Flight Time of a Roof Inspection Drone
The longer the flight time you get from your drone, the better it will be. A flight time of fewer than 20 minutes is utterly useless. It is true that you can get an additional battery inserted and recharge the other one in the meantime, but still it can waste a lot of your important time. Your workflow speed can be greatly enhanced if you opt for the drones that can provide a flight duration of about 25 to 27 minutes and are equipped with fast charging features. Ensure that your roof inspection drone comes with a LiPo battery that can get charged up pretty fast. Also, make sure to have an additional battery in your repertoire. Failing to do so, could land you in trouble.
This is not a mandatory feature for a good roof inspection drone but to have a long-range is certainly not at all bad as well. However, if you are one of those who get to inspect the roofs of mansions, penthouses, and other such expensive buildings, you might need a drone with a long control range. Remember that you need to have several hundred meters of operating range in tandem with FPV to get your roof inspection job done impeccably.
[irp posts=”11550″ name=”8 Drones that come with the Longest Control Range Features”]
The waypoints feature, as discussed above, is one of the most important features to have on a good roof inspection drone. Most of the intermediate drones and even the low-end ones are loaded with this feature that is becoming a norm in the drone industry. The Waypoints feature works in tandem with the GPS. It lets you sketch up waypoints on a map and adjust them as per your requirements. By adjustment, we mean to calibrate the elevation, speed, camera orientation, and other such aspects. Once all has been configured, the drone starts to follow the programmed trajectory autonomously and you can concentrate on the camera and gimbal to inspect your drone.